Despite being seemingly insignificant, the strap is an important part of any camera irrespective of its price. It keeps your precious camera from falling and slipping. But – not many beginners know how to attach camera strap correctly.
Cameras can be quite heavy, especially when you use the lens and flash as well. Loosely or incorrectly attached straps cannot hold such a huge weight and would give way at some stage. If you don’t want your camera to get damaged, you should learn how to attach a camera strap before you start using the camera itself.
Steps to Attach Camera Straps the Right Way
It is also pretty easy to attach a camera strap. It only involves a few steps which are as below. We strongly recommend going through these Canon camera strap instructions if you want to keep your camera safe while in use.
Step 1: Every camera strap has a plastic buckle with two plastic strips and the strap itself passes through them. The plastic buckle should face upwards.
Step 2: Now pass the plastic strap from the outside of the metal ring towards the camera.
Step 3: Pass the strap through the plastic fastener and pull it upwards.
Step 4: Now create a slack by pulling the strap from the top of the buckle.
Step 5: Feed the loose end of the strap towards the inside of the loop from the top buckle hole.
Step 6: Now feed the strap from the inside of the loop through the bottom hole.
Step 7: Now pull the loose strap down in such a way that is right in between the other two parts of the strap.
Step 8: Tighten the slack in the buckle by pulling the main part of the strap up.
Step 9: Pull the fastener up towards the buckle. It will further tighten the strap and eliminate the chances of camera slips.
Step 10: Tighten the strap on the other end by repeating the same process.
The following video by Photo Genius also explains how to attach camera strap correctly.
Also Read: How Does a Camera Capture an Image?
Frequently Asked Questions
How do you carry a camera with a strap?
To carry a camera with a strap, you typically attach the strap’s ends to the camera’s designated attachment points, usually located on either side of the camera body. You then place the strap around your neck or shoulder, adjusting the length so the camera rests comfortably at your side or in front of you, allowing easy access for shooting.
How should a camera strap fit?
A camera strap should fit comfortably around your neck or shoulder, with the length adjusted so the camera hangs at a convenient height for quick access. It should not be too tight to cause discomfort or too loose to swing excessively. The strap should also distribute the camera’s weight evenly to avoid strain on any one part of your body.
Do camera straps fit all cameras?
Most camera straps are designed with universal attachments to fit a variety of camera models and brands, using standard loops or rings on the camera body. However, some cameras, especially larger or heavier professional models, might require specific straps for secure attachment and better weight distribution.
Are camera straps worth it?
Camera straps are considered worth it by many photographers for the added security and convenience they offer. They prevent accidental drops by keeping the camera attached to your body and allow for hands-free movement when not actively shooting. Straps can also be a comfort feature, distributing the weight of the camera to reduce fatigue during extended use.
Final Thoughts
Congratulations! You have just learned how to attach camera strap correctly. Now you can securely fasten your camera and use it to take beautiful pictures without any worries.